I cannot generate a 2D contour tool path for the word CHRISTMAS


Results 1 to 1 of 1

Thread: I cannot generate a 2D contour tool path for the word CHRISTMAS

  1. #1
    Member
    Join Date
    Mar 2011
    Location
    USA
    Posts
    318
    Downloads
    0
    Uploads
    0

    Question I cannot generate a 2D contour tool path for the word CHRISTMAS

    I have created a sketch with the word Christmas. All I am trying to do is cut this word out using a 2D contour tool path but I CANNOT select the geometry. I can select the leading C but the rest of the text, which was all created at the same time, I cannot select. If I create Merry Christmas I can select the M and the erry and the C but not the hristmas.
    See attached Paint (.png) file.

    I don't get it.

    The text is create as follows.

    I create a new sketch.

    I do a create text and set up the text.

    I accept the text.

    I do an explode text.

    I trim out the extraneous lines.

    I finish the sketch.

    I select all the letters.

    I do a press pull for .121 inches.

    I go to manufacture and create a new setup.

    I select the 2D contour and TRY to select all the contours but I can only select the C.

    I cannot generate a 2D contour tool path for the word CHRISTMAS-christmas-pic-jpg

    This has worked perfectly in the past and works now with the word Merry but not with Christmas.
    Even if I leave off the C the rest of the word will not allow me to select it. All I get are a bunch of little segments instead of the entire outline.


    I don't get it.

    I attached the fusion file.
    If anybody has a clue about this please help.
    Thanks

    Similar Threads:
    Attached Thumbnails Attached Thumbnails I cannot generate a 2D contour tool path for the word CHRISTMAS-merry-christmas-jpg  
    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

I cannot generate a 2D contour tool path for the word CHRISTMAS

I cannot generate a 2D contour tool path for the word CHRISTMAS

I cannot generate a 2D contour tool path for the word CHRISTMAS