EDIT POST PROCESSOR. change tool output, and tool hight offset output. need help.

[dj_pigs]

Hi, I need help to edit fusion 360 post processor, ANDERSON, (not the full line.)
The output it give me is T001 and G43 H1 with z move.

Need tool change is T101 for tool 1 , T102 to T110. tools 2 to 10. on first spindle.

the tool offset is G43 H11 to H20 for tools 1 to 10.
Any help would be welcome.

Similar Threads:

• Auto Tool Change Post Processor
• New Machine Build- Looking to add tool list output to post processor (Esprit 2016)
• Problem- Post Edit Help Request - Removing A Output and modifying Tool Change
• Need Help!- Change post to output A instead of B-how?
• Newbie- Bobcad 23 Post edit T# output, Dynapath Delta 20 M Milling Machine

[dj_pigs]

Fixed it.