Need Help! Hyundai Skt21 LMS Fusion 360 Post Processor


Results 1 to 2 of 2

Thread: Hyundai Skt21 LMS Fusion 360 Post Processor

  1. #1

    Default Hyundai Skt21 LMS Fusion 360 Post Processor

    Hello, I have Fanuc conrolled Hyundai SKT lathe. I'm currently using a Doosan Puma post with decent luck, but still finding bugs. Does anyone have a clean post available for my lathe? Thanks in advance, Dan

    Similar Threads:


  2. #2
    Member thePostmaster's Avatar
    Join Date
    May 2022
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default Re: Hyundai Skt21 LMS Fusion 360 Post Processor

    Hi Dan.

    I specialise in developing post processors for CNC machines not yet supported by Autodesk.

    Let me know if you'd like me to take at look at writing one for your lathe.

    You can contact me directly at [email]michael@thepostmaster.co.za[/email]



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hyundai Skt21 LMS Fusion 360 Post Processor

Hyundai Skt21 LMS Fusion 360 Post Processor