Need Help! ProtoTRAK EX lathe post prossessor issues


Results 1 to 2 of 2

Thread: ProtoTRAK EX lathe post prossessor issues

  1. #1
    Activation process MMCDesign's Avatar
    Join Date
    Jun 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default ProtoTRAK EX lathe post prossessor issues

    I am new to the CAM game, so I don't know if it's me, HSMWorks, or the ELX lathe that messing things up.

    My issue: The .CAM file when imported into the lathe creates incomplete lathe turning cycles. The tool offset is not what I had in HSMWorks, the feeds didn't get input and the arc directions are showing on the display, but are not inputed in the lathe progam.
    The .CAM is created using the published post prossessor for the lathe.

    Any help will be greatly appreciated.

    Mike

    Similar Threads:


  2. #2
    Activation process MMCDesign's Avatar
    Join Date
    Jun 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: ProtoTRAK EX lathe post prossessor issues

    I have attached the posted .CAM file and the lathe controller generated .LX2 file.
    MMC

    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

ProtoTRAK EX lathe post prossessor issues

ProtoTRAK EX lathe post prossessor issues