Post processor needed for a 4-axis CNC Machine


Results 1 to 3 of 3

Thread: Post processor needed for a 4-axis CNC Machine

  1. #1
    Member nategjl's Avatar
    Join Date
    Apr 2021
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Post processor needed for a 4-axis CNC Machine

    Would anyone happen to have a post processor for my 4-axis CNC Machine or know of one that may work for it? I use Fusion 360.



    The make of the machine is Blue Elephant and the model name is ELECNC-3012-4.



    Any assistance will be appreciated.

    Similar Threads:


  2. #2
    Member nategjl's Avatar
    Join Date
    Apr 2021
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Post processor needed for a 4-axis CNC Machine

    The controller is RichAuto. Would anyone happen to know a RichAuto post for 4th axis milling?



  3. #3
    Member
    Join Date
    Jan 2018
    Location
    United Kingdom
    Posts
    831
    Downloads
    0
    Uploads
    0

    Default Re: Post processor needed for a 4-axis CNC Machine

    Which board is it?
    I've just read through the manual for the B11 board and it doesn't support a 4th axis rotary.
    It is a 4 axis but..... It only supports the 4th as a slave to the Y on a router.

    You need to have a read of your boards manual to see if it wsupports it first.

    It states that it reads standard G code so I assume a Mach post should work.


    Boards looked at:
    B18: Supports a rotary C.
    B11: Nope. XYZ+ slave Y only.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Post processor needed for a 4-axis CNC Machine

Post processor needed for a 4-axis CNC Machine

Post processor needed for a 4-axis CNC Machine