Need Help! Editing a postprocessor, need to move the M09/M08 to different location..


Results 1 to 3 of 3

Thread: Editing a postprocessor, need to move the M09/M08 to different location..

  1. #1
    Member
    Join Date
    Dec 2007
    Location
    Canada
    Posts
    76
    Downloads
    0
    Uploads
    0

    Default Editing a postprocessor, need to move the M09/M08 to different location..

    [url]https://a360.co/2LtqrA3[/url]

    this is my post processor /\.
    I need to move the M09 to start flood to after machine moves start position..and move M08 to
    shut off flood right after it retracts from part.
    Can also start spindle and stop spindle at same position...

    For a Maldas 64 control, Milling machine...using Fusion 360.

    Thanks in advance..

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2007
    Location
    Canada
    Posts
    76
    Downloads
    0
    Uploads
    0

    Default Re: Editing a postprocessor, need to move the M09/M08 to different location..

    sorry, this is M08 for start and M09 for shut off...



  3. #3
    Member
    Join Date
    Dec 2007
    Location
    Canada
    Posts
    76
    Downloads
    0
    Uploads
    0

    Default Re: Editing a postprocessor, need to move the M09/M08 to different location..

    ok looks like I fixed the M08, still need to fix the M09...to shut off before it goes to home position..



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Editing a postprocessor, need to move the M09/M08 to different location..

Editing a postprocessor, need to move the M09/M08 to different location..

Editing a postprocessor, need to move the M09/M08 to different location..