Mazak Integrex IV matrix control post processor for Fusion 360

[northernmach]

Really would like to any ones advice on a post processor for Fusion 360 to out put code for a Mazak Integrex Mark IV with matrix control. This particular Integrex is programmed with turning in mind first and milling secondary. Other models are Milling first with turning second. As I understand it there are differences between the output. I am looking for recommendations, opinions, ect.... on whether we should be trying to program this machine from Fusion 360 which we are now using in the shop as our CAD software. Also if anyone has any information on how to get a post or has dealt with a company to provide a post for Fusion 360 please also respond.

Thanks,
Chad

Similar Threads:

• Post processor for Mazak Integrex!
• power mill post processor for mazak matrix nexus
• Need Help!- How to Park Lower Turret mazak Mark IV Integrex Matrix Control
• How to run XC milling on Mazak Integrex Mazatrol Matrix
• Need Help!- Mazak integrex 200-IV mazatrol matrix alarm 1281

[Maroslav4]

Hello,

if it is still actual.

You can let me know on msskotak@gmail.com



Im a programmer with focus on a postprocessor coding