Hello,
if it is still actual.
You can let me know on msskotak@gmail.com
Im a programmer with focus on a postprocessor coding
Really would like to any ones advice on a post processor for Fusion 360 to out put code for a Mazak Integrex Mark IV with matrix control. This particular Integrex is programmed with turning in mind first and milling secondary. Other models are Milling first with turning second. As I understand it there are differences between the output. I am looking for recommendations, opinions, ect.... on whether we should be trying to program this machine from Fusion 360 which we are now using in the shop as our CAD software. Also if anyone has any information on how to get a post or has dealt with a company to provide a post for Fusion 360 please also respond.
Thanks,
Chad
Similar Threads:
Multi-Tasking Machining - Customer savings, and shorter lead times!
www.northernmachininginc.com
Hello,
if it is still actual.
You can let me know on msskotak@gmail.com
Im a programmer with focus on a postprocessor coding
Postprocessors, VBA macros, .NET programming.
www.ccsoftcz.com