HSM 2018 Post for Okuma OSP-P300MA-e


Results 1 to 3 of 3

Thread: HSM 2018 Post for Okuma OSP-P300MA-e

  1. #1
    Registered Meintjes's Avatar
    Join Date
    Dec 2017
    Location
    South Africa
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default HSM 2018 Post for Okuma OSP-P300MA-e

    Hi All, Does anyone have a working post processor for Okuma Control OSP-P300MA-e.

    With the generic post the machine won't do circular machining.

    Thanks

    Similar Threads:


  2. #2
    Registered Meintjes's Avatar
    Join Date
    Dec 2017
    Location
    South Africa
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: HSM 2018 Post for Okuma OSP-P300MA-e

    It's a standard 3 axis machine



  3. #3
    Registered Meintjes's Avatar
    Join Date
    Dec 2017
    Location
    South Africa
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: HSM 2018 Post for Okuma OSP-P300MA-e

    We are already sorted, thank you.

    Sent from my SM-J730F using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

HSM 2018 Post for Okuma OSP-P300MA-e

HSM 2018 Post for Okuma OSP-P300MA-e