Hyundai Lathe with Siemens 840c and Fusion 360 Post Processor

[TC Machine]

Hello all,
I have searched the world over for a post processor for Siemens 840c lathe and Fusion 360. I have not been able to modify an existing one to be worth while using. I am sure that there is alot of these combinations in use. Does anyone have a solution?
I have the PC and the machine communicating just fine. I am happy to share that setup if it helps anyone.
Thanks in advance to anyone compelled to help, In the meantime, I am just going to poke the buttons the old school way.

Trevor

Similar Threads:

• Hyundai Hit30s - Siemens 840C
• post for Hyundai Hit-15s Siemens Sinumerik 840c
• Problem- Hyundai HiT 18s CNC lathe with Siemens 840c control
• Problem- 1996 Hyundai HiTrol 15S CNC lathe w/ Siemens Sinumerik 840C Simodrive 611D rigid tap?
• Hyundai Hit8s with siemens 840c

[Maroslav4]

Still looking it?

[TC Machine]

Yes, I would still like to find a good post processor for this combination. Thanks

[Maroslav4]

Please send me NC code example to my email [email]msskotak@gmail.com[/email].

I will check it.