Inventor iLogic CAD model to generate toolpath for specific CAD profiles , Not all
Hello,
Complete newbie, I'm using iLogic to configure a door stile (#hinges, inswing/outswing, length of door etc.) in the CAD environment. I have generated toolpaths for all the different configurations the CAD outputs. But when I regenerate the toolpath based on the iLogic, the entire .nc code for all the tool paths is posted instead of the ones selected by iLogic and are visible. Is there a workaround around this, to only post the G-code for configured profiles? Or Inventor CAM does not have this capability?
Re: Inventor iLogic CAD model to generate toolpath for specific CAD profiles , Not al
In the past what I've done is to copy the same complete cad file multiple times on the pc.
So example if I have a cad file with 5 operations I would:
Copy (duplicate) the file 5 times on the pc, so xxxx1-5
Leave #1 tootlpath on cad #1 and delete the rest.
On file #2 leave toolpath #2 and delete the rest.
On file #3 leave toolpath #3 and delete the rest.. Etc...