- Heidenhain TNC145 Fusion 360 Post, Incorrect End of Circle
-
Member
Heidenhain TNC145 Fusion 360 Post, Incorrect End of Circle
Hi,
Trying out post processing in Fusion360 for my Bridgeport R2C3 with TNC145 controller. I drew up an Octagon as a contour test.
Fusion360 spits out a gcode with c and cc code. And after uploading and trying to run it on my machine, it gives me an Incorrect End of circle error.
I'm attaching my post processor, f360 dwg file and the gcode result.
Can someone familiar with this setup please advise? I really don't want to rip out the electronics and upgrade it as of yet.
https://a360.co/3IFHtmy
Thank you.
Similar Threads:
Last edited by gta18; 01-25-2022 at 06:09 PM.
Reason: added fusion 360 link to drawing file
-
- Heidenhain TNC145 Fusion 360 Post, Incorrect End of Circle
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules