- HELP! Alarm #410 tool change Matsuura 510V Yasnac MX3
-
Member
HELP! Alarm #410 tool change Matsuura 510V Yasnac MX3
Hello friends!
I'm asking for help!
I have a Matsuura 510V with Yasnac MX3. When trying to change an instrument, something strange happens to the movements of the hand. It does not open the spindle collet and passes the Home position, then makes a second attempt to change the tool and stops in the middle. The alarm it displays is # 410. I checked all the sensors in the diagnostics and they work. Has anyone had this problem?
I am sending a link with a video of the attempt to change the tool:
https://m.youtube.com/watch?reload=9&v=KkO1OiJ-xVA
Any opinion will be helpful!
Thanks in advance everyone!
Similar Threads:
-
-
Member
Re: HELP! Alarm #410 tool change Matsuura 510V Yasnac MX3
Hey mate could you please send me manual of this machine?
- HELP! Alarm #410 tool change Matsuura 510V Yasnac MX3
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules