ATC spindle damaged gripper repair

Results 1 to 2 of 2

Thread: ATC spindle damaged gripper repair

  1. #1
    Registered
    Join Date
    Nov 2015
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default ATC spindle damaged gripper repair

    Hello,

    A while ago I bought a used ATC spindle. I didnt needed it immediately so I put it at the rest of the parts, waiting till the moment I could use it for something. At the moment I wanted to try it I noticed that the four finger/petal/gripper was damaged and was having only three fingers left. The runout from the ISO20 holder was way too much, like 0,2mm.

    It seems the gripper is just screwed on the draw bar. Unfortunately it also seems it is not an easy fix.

    Gripper url: https://nl.aliexpress.com/item/ISO20...6167883b73d-27




    This is the spindle: GDL80-20-24Z/2.2









    I also found this thread: https://www.cnczone.com/forums/omni-...24z-2-2-a.html

    Unfortunately CNCzone didnt allowed me to post anything overthere.


    Is there somebody who can tell me more about repairing this spindle?

    Already thanks!

    Similar Threads:
    Last edited by Cncdepartment; 02-07-2019 at 09:35 AM.


  2. #2
    Registered
    Join Date
    Nov 2015
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: ATC spindle damaged gripper repair

    Or is somebody having some drawings from this spindle maybe?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

ATC spindle damaged gripper repair

ATC spindle damaged gripper repair