tool changer mach3

Results 1 to 7 of 7

Thread: tool changer mach3

  1. #1
    Registered
    Join Date
    Dec 2014
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default tool changer mach3

    Good morning, I just bought a cnc router.
    To have the problem is that I want you to make some trajectories with a milling tool first and then change tool automatically and make a 2 path.
    Well then after doing the design in aspire postprocess with mach3 / atc. I send it to the CNC and it makes the first trajectories, then it goes and changes the tool and returns to part 0 to start its second trajectories, but at that point it again changes tools and enters a tool change loop, specifically Go back to line 14, can someone tell me what I'm doing wrong?
    I have tried to postprocess independent files (copy and paste), I would greatly appreciate your help, I leave you the code generated by vectric aspire., Greetings.

    ( cambioher )
    ( File created: Wednesday October 10 2018 - 06:14 PM)
    ( for Mach2/3 from Vectric )
    ( Material Size)
    ( X= 300.000, Y= 300.000 ,Z= 10.000)
    ()
    (Toolpaths used in this file
    (Perfilado 1)
    (Perfilado 2)
    (Tools used in this file: )
    (3 = aluminio)
    (4 = aluminio2)
    N120G00G21G17G90G40G49G80
    N130G71G91.1
    N140T3M06
    N150 (aluminio)
    N160G00G43Z20.320H3
    N170S10000M03
    N180(Toolpath:- Perfilado 1)
    N190()
    N200G94
    N210X0.000Y0.000F3600.0
    N220G00X48.846Y163.982Z5.080
    N230G1X48.846Y163.982Z-3.000F600.0
    N240G1X128.846Y163.982Z-3.000F3600.0
    N250G1X128.846Y233.982Z-3.000
    N260G1X48.846Y233.982Z-3.000
    N270G1X48.846Y163.982Z-3.000
    N280G00X48.846Y163.982Z5.080
    N290T4M6
    N300 (aluminio2)
    N310G43H4
    N320S10000M03
    (Perfilado 2)
    ()
    N350G00X88.846Y229.434Z5.080
    N360G1X88.846Y229.434Z-3.000F600.0
    N370G3X58.394Y198.982I0.000J-30.452F3600.0
    N380G3X88.846Y168.530I30.452J0.000
    N390G3X119.298Y198.982I0.000J30.452
    N400G3X88.846Y229.434I-30.452J0.000
    N410G00X88.846Y229.434Z5.080
    N420G00Z20.320
    N430G00X0.000Y0.000
    N440M09
    N450M30
    %

    PD: I do the simulation in match3 and without problem, but when you do it physically, you do the things described above.
    Also say that the machine with command t6 changes tool without problem, it is only when I execute a code g.
    atacchment macro m6start. thank you.


    Similar Threads:
    Attached Files Attached Files


  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    32639
    Downloads
    0
    Uploads
    0

    Default Re: tool changer mach3

    I'm not aware of anything in Mach3 that can cause what you are seeing.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Gold Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    8523
    Downloads
    0
    Uploads
    0

    Default Re: tool changer mach3

    Quote Originally Posted by javiele66 View Post
    Good morning, I just bought a cnc router.
    To have the problem is that I want you to make some trajectories with a milling tool first and then change tool automatically and make a 2 path.
    Well then after doing the design in aspire postprocess with mach3 / atc. I send it to the CNC and it makes the first trajectories, then it goes and changes the tool and returns to part 0 to start its second trajectories, but at that point it again changes tools and enters a tool change loop, specifically Go back to line 14, can someone tell me what I'm doing wrong?
    I have tried to postprocess independent files (copy and paste), I would greatly appreciate your help, I leave you the code generated by vectric aspire., Greetings.

    ( cambioher )
    ( File created: Wednesday October 10 2018 - 06:14 PM)
    ( for Mach2/3 from Vectric )
    ( Material Size)
    ( X= 300.000, Y= 300.000 ,Z= 10.000)
    ()
    (Toolpaths used in this file
    (Perfilado 1)
    (Perfilado 2)
    (Tools used in this file: )
    (3 = aluminio)
    (4 = aluminio2)
    N120G00G21G17G90G40G49G80
    N130G71G91.1
    N140T3M06
    N150 (aluminio)
    N160G00G43Z20.320H3
    N170S10000M03
    N180(Toolpath:- Perfilado 1)
    N190()
    N200G94
    N210X0.000Y0.000F3600.0
    N220G00X48.846Y163.982Z5.080
    N230G1X48.846Y163.982Z-3.000F600.0
    N240G1X128.846Y163.982Z-3.000F3600.0
    N250G1X128.846Y233.982Z-3.000
    N260G1X48.846Y233.982Z-3.000
    N270G1X48.846Y163.982Z-3.000
    N280G00X48.846Y163.982Z5.080
    N290T4M6
    N300 (aluminio2)
    N310G43H4
    N320S10000M03
    (Perfilado 2)
    ()
    N350G00X88.846Y229.434Z5.080
    N360G1X88.846Y229.434Z-3.000F600.0
    N370G3X58.394Y198.982I0.000J-30.452F3600.0
    N380G3X88.846Y168.530I30.452J0.000
    N390G3X119.298Y198.982I0.000J30.452
    N400G3X88.846Y229.434I-30.452J0.000
    N410G00X88.846Y229.434Z5.080
    N420G00Z20.320
    N430G00X0.000Y0.000
    N440M09
    N450M30
    %

    PD: I do the simulation in match3 and without problem, but when you do it physically, you do the things described above.
    Also say that the machine with command t6 changes tool without problem, it is only when I execute a code g.
    atacchment macro m6start. thank you.
    Why are you using Incremental should be programing in absolute, the postprocessor is poorly done it is putting out very messy code, try and clean it up, get rid of all the unneeded comments and lines of code that are not needed

    Are you using a licensed Mach3 software or did it come with the machine from China

    Mactec54


  4. #4
    Registered
    Join Date
    Dec 2014
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: tool changer mach3

    hello, mach3 is licensed, code g is generated with vectric aspire 9.0, excuse my ignorance but I'm new to cnc, which is incremental and absolute and how is it changed? Thank you



  5. #5
    Gold Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    8523
    Downloads
    0
    Uploads
    0

    Default Re: tool changer mach3

    Quote Originally Posted by javiele66 View Post
    hello, mach3 is licensed, code g is generated with vectric aspire 9.0, excuse my ignorance but I'm new to cnc, which is incremental and absolute and how is it changed? Thank you
    It appears to be posted as G91 incremental G90 is absolute

    This is a simple 2inch square with round corners, you program should look a similar format to this, you can have other code combination's but this is the most basic format you want to have for any 3 axes machine

    It is also moving all 3 axes simultaneously as it moves around the corners of the part

    %
    O3483( 2 inch Square )
    N1G17G40G80
    T7M6 (.500EndMill)
    M8
    G54
    S2850M3
    G90G0X.3026Y-2.31
    G43Z.1H7
    G1Z0.F20.
    G2X.3626Y-2.25I.06F14.
    G1X1.8Z-.0031
    G3X2.25Y-1.8Z-.0046J.45
    G1Y-.2Z-.0081
    G3X1.8Y.25Z-.0096I-.45
    G1X.2Z-.0131
    G3X-.25Y-.2Z-.0146J-.45
    G1Y-1.8Z-.0181
    G3X.2Y-2.25Z-.0196I.45
    G1X.3626Z-.02
    X1.8Z-.0231
    G3X2.25Y-1.8Z-.0246J.45
    G1Y-.2Z-.0281
    G3X1.8Y.25Z-.0296I-.45
    G1X.2Z-.0331
    G3X-.25Y-.2Z-.0346J-.45
    G1Y-1.8Z-.0381
    G3X.2Y-2.25Z-.0396I.45
    G1X.3626Z-.04
    X1.8Z-.0431
    G3X2.25Y-1.8Z-.0446J.45
    G1Y-.2Z-.0481
    G3X1.8Y.25Z-.0496I-.45
    G1X.2Z-.0531
    G3X-.25Y-.2Z-.0546J-.45
    G1Y-1.8Z-.0581
    G3X.2Y-2.25Z-.0596I.45
    G1X.3626Z-.06
    X1.8Z-.0631
    G3X2.25Y-1.8Z-.0646J.45
    G1Y-.2Z-.0681
    G3X1.8Y.25Z-.0696I-.45
    G1X.2Z-.0731
    G3X-.25Y-.2Z-.0746J-.45
    G1Y-1.8Z-.0781
    G3X.2Y-2.25Z-.0796I.45
    G1X.3626Z-.08
    X1.8Z-.0831
    G3X2.25Y-1.8Z-.0846J.45
    G1Y-.2Z-.0881
    G3X1.8Y.25Z-.0896I-.45
    G1X.2Z-.0931
    G3X-.25Y-.2Z-.0946J-.45
    G1Y-1.8Z-.0981
    G3X.2Y-2.25Z-.0996I.45
    G1X.3626Z-.1
    X1.8
    G3X2.25Y-1.8J.45
    G1Y-.2
    G3X1.8Y.25I-.45
    G1X.2
    G3X-.25Y-.2J-.45
    G1Y-1.8
    G3X.2Y-2.25I.45
    G1X.3626
    G2X.4226Y-2.31J-.06
    G0Z3.
    M9
    G53Y0.
    M5
    M30
    %

    Mactec54


  6. #6
    Registered
    Join Date
    Dec 2014
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: tool changer mach3

    hello, Do you think that can be that? how do I solve it? thank you.



  7. #7
    Registered
    Join Date
    Dec 2014
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: tool changer mach3

    I need help, someone helps me, thanks.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

tool changer mach3

tool changer mach3