- Fanuc O-M tool changer not working
-
Registered
Fanuc O-M tool changer not working
Hello everybody!
Recently I bought a nice Takisawa MAC V1E mill with Fanuc O-M steering and a 10 fold caroucel tool changer from 1991.
After rebuilding the machine, I can bring the spindle with MDI in the right position (M19) but nothing happens in the tool changer (M6, T1). Only a small red led is burning.
I have 6.5 bars of pressure.
All axes are brought to there null position and moved halve way with hand operation.
Is a macro needed with command M6?
Any ideas are very welcome!!!!!
Thanks, Leo
Similar Threads:
Last edited by lblade; 11-06-2014 at 11:13 AM.
-
- Fanuc O-M tool changer not working
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules