- Australia Hafco BM-90VCNC with Heidenhain tnc310 machine parameter problem (Extron b4fc)
-
Member
Hafco BM-90VCNC with Heidenhain tnc310 machine parameter problem (Extron b4fc)
Hi Guys
i have posted earlier in the wrong section I think.
My machine has lost its parameters after the battery went flat.
As this machine was sold in Australia. I'm hoping someone on here might have one in
their workshop.
Hare and Forbes bought Herless so there could be machines branded as Herless ,( Not sure)
.
The machine is a rebadge of an Extron B4FC
My machine has a TNC 310 controller
Any help would be appreciated.
Cheers
Karl
Similar Threads:
-
- Australia Hafco BM-90VCNC with Heidenhain tnc310 machine parameter problem (Extron b4fc)
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules