- Australia Melbourne - Bridgeport/Heidenhain Guru needed
-
Member
Melbourne - Bridgeport/Heidenhain Guru needed
Hi all,
I'm knee deep in trying to fix my Bridgeport tool changer, the spindle encoder is on the fritz, some days it likes to play ball but mostly it wont.
I have downloaded as many manuals and the like to try and understand how to diagnose the issue but im coming up short each time.
Is there a guru in and around Melbourne who could either come and troubleshoot the issue or can walk me through the process myself.
my machine is a Bridgeport VMC 1000-22 running on a Heidenhain TNC 2500 b
Cheers,
Adam
Similar Threads:
-
-
Member
Re: Melbourne - Bridgeport/Heidenhain Guru needed
Had a great technician out today to trace the encoder signal,
first off the machine
Encoder signal goes to Heidenhain controller card no issues, signal can be seen from the pins on the control board. We can also see the analogue output from 0-10v which incrementally move up as the rpm is changed ie 500rpm = .5v 2000 rpm = 2v and inverse for counterclockwise
this is seen at the simodrive analogue inputs
seems the simodrive isnt seeing 0.0v as stop thinking maybe the simodrive is faulty
- Australia Melbourne - Bridgeport/Heidenhain Guru needed
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules