Problem

[bezza]

Hi all, l have been using a home made machine for about 10 years as hobby, went to Gcode a part yesterday in Makecam which l have used for about the last 2 years with no problems so easy to use now it wont open with a full screen, any help would great

Similar Threads:

• Omni 1350 Linear ATC Indexing problem on z axis problem
• Need Help!- Fadal Idler problem. Rpm pulse problem
• Tube problem or powersupply problem? Help you to check out
• daewoo puma 12lb tape format problem/parameter problem
• Surface finish problem - Could you please help me overcome this problem?

[Zenji]

Hi all, l have been using a home made machine for about 10 years as hobby, went to Gcode a part yesterday in Makecam which l have used for about the last 2 years with no problems so easy to use now it wont open with a full screen, any help would great

Windows setting, do they still have bbqs in oz?

[bezza]

Hi Zenji ,after playing for the last 2 days 10 hours a day changing setting and trying after every change it works. full screen. Have changed that many settings l cant tell you what fix it my head is Done but it was in setting. thanks for your reply