Dunedin NZ smal job needed

[dudz]

Hi
Im in Dunedin NZ.

Need a small job done. Ive got a aluminium solide tube around 32mm dia that I need taken down to 21mm

Anybody out there please?

Similar Threads:

• smal mechanical-only kit with 80mm spindle?
• ALUMINUM BUSHING, NEEDED LOTS OF 40, APPROX 200 PER YEAR NEEDED (bid till Aug 1 2015)
• Australia [ADVICE NEEDED] Z-Axis not moving - CNC builder needed
• drawings end up way too smal

[RCaffin]

A solide tube????
32 mm down to 21 mm is a huge reduction, and a massive waste of aluminium too. I can't imagine a tube with such a wall thickness.
You don't mention length either.

Cheers
Roger

[dudz]

A solide tube????
32 mm down to 21 mm is a huge reduction, and a massive waste of aluminium too. I can't imagine a tube with such a wall thickness.
You don't mention length either.

Cheers
Roger

Yes a solid tube. its actually 26mms dia but needs to be 21.5 for the first 56mms. Length is 23cms. Your a bit far from NZ for such a small job Roger.

waist aluminium isnt an issue when modifying . Its not gold

[upnorth]

I think what Rcaffin was getting at is that tubes are hollow and not solid. You probably mean you have a round bar. Cutting down a tube the amount you mention would be a huge reduction. There would in most cases be no wall left. Cutting down a piece of round bar that amount is an easy job. I would gladly cut it down for you but I'm on the other side of the world.

[dudz]

ah well thats why I said solid. yep bar might have been a better description. When I lived in Europe there were dozens of people who would have done it localy. here in NZ , I cant find any

I got a cnc, maybe i should get a lathe.]

[upnorth]

ah well thats why I said solid. yep bar might have been a better description. When I lived in Europe there were dozens of people who would have done it localy. here in NZ , I cant find any

I got a cnc, maybe i should get a lathe.]

I have a CNC mill and lathe. The lathe is not operational yet. I recently bought a manual lathe to go along with them. I thought there was no need for a manual lathe but I think now it will be a great addition. Its a pain not having one of the two machines. I'm sure someone will pop up in your area with a lathe.