Australia g-code for probe (xyz)


Results 1 to 2 of 2

Thread: g-code for probe (xyz)

  1. #1
    Activation process thewillow's Avatar
    Join Date
    Nov 2018
    Posts
    26
    Downloads
    0
    Uploads
    0

    Default g-code for probe (xyz)

    Hi Folks, I've been looking for some script to help with my triple edge finder, but want to keep things relatively simple. ie; no screen sets etc. I had a look at some programs and thought I may be able to write something myself, being fairly fussy. One was using the back of the finder, but I thought it may work better using the front left to avoid knocking the piece from it's position. This is my first attempt at g-code and I was hoping someone may be able to give it a once over and see if it would (could) work. cheers
    G21
    G38.2 Z-12.7 F50
    G92 Z3
    G91 GO Z12
    G91 GO X-25.4
    G91 GO Z-25.4
    G38.2 X12.7 F50
    G92 X-3
    G91 GO X-5
    G91 GO Y-30
    G91 GO X30
    G38.2 Y12.7 F50
    G92 Y-3
    G92 GO Y-5
    G91 GO Z30

    Thanks in advance if someone has the time.

    Similar Threads:
    Last edited by thewillow; 07-14-2019 at 08:33 AM. Reason: error


  2. #2
    Member MyGarageShop's Avatar
    Join Date
    Dec 2016
    Location
    United States
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by thewillow View Post
    Hi Folks, I've been looking for some script to help with my triple edge finder, but want to keep things relatively simple. ie; no screen sets etc. I had a look at some programs and thought I may be able to write something myself, being fairly fussy. One was using the back of the finder, but I thought it may work better using the front left to avoid knocking the piece from it's position. This is my first attempt at g-code and I was hoping someone may be able to give it a once over and see if it would (could) work. cheers
    G21
    G38.2 Z-12.7 F50
    G92 Z3
    G91 GO Z12
    G91 GO X-25.4
    G91 GO Z-25.4
    G38.2 X12.7 F50
    G92 X-3
    G91 GO X-5
    G91 GO Y-30
    G91 GO X30
    G38.2 Y12.7 F50
    G92 Y-3
    G92 GO Y-5
    G91 GO Z30

    Thanks in advance if someone has the time.
    Triple Edge Finder Script
    https://youtu.be/FUlXikOPHbw



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

g-code for probe (xyz)

g-code for probe (xyz)