Australia working with perspex, looking for some information - Page 2


Page 2 of 2 FirstFirst 12
Results 21 to 23 of 23

Thread: working with perspex, looking for some information

  1. #21

    Default Re: working with perspex, looking for some information

    Gerry G'day,

    Thank you very much for going to the trouble I will do that first thing in the morning and see how that goes.

    Cheers mate I appreciate your going the extra to help out..

    Steve



  2. #22

    Default Re: working with perspex, looking for some information

    I struggled with this for a long time, after lots of research I have found my optimum point, using a 1mm upcut blade for plastic, I am cutting at 24000rpm, feedrate of 1500mm/m and a depth of cut @ 1mm, and it cuts beautiful everytime leaving 0.25 for final pass. Hope this may help you aswell.



  3. #23

    Default Re: working with perspex, looking for some information

    Hey G'day,

    Thank you for your post. That is good to know and I will put that down in my arsenal of what and how with perspex.

    Ty for taking the time, its penciled and saved.

    Cheers,
    Steve



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

working with perspex, looking for some information

working with perspex, looking for some information