Hello
Thank you for reply!
1: Machine is a Router
2: Sometimes the machine just stops which can be a soft limit thing or the Gecko Drive red light comes on. I think this is user error not so much the machine. Im also not sure if i have set the acceleration curves for the motors correct (again just trial and error). I set feed rates in AlphaCam and sometimes i cant increase feed rates while the machine is running. If sitting there doing nothing but on sometimes it makes like a shutter sound (rarely)
3: I will take some pics tonight and post but heres a link to what it looks like almost exact
Creation Technology (H.K.)
4: Accuracy is not so bad, but i have set it up manually using mach 3 Move 50mm then measure how much it moved and then it recalculates. I think the reason for inaccuracy is the gantry momentum coming to a stop as such (if that makes sense) I would be happy with .25 of a mm
5: I cut Wood, Ply, MDF, native timber
Does that help?
thanks very much
Darian