New Here Best CNC Cutter for 21mm pine


Results 1 to 2 of 2

Thread: Best CNC Cutter for 21mm pine

  1. #1
    *Registered User* JasonNZ's Avatar
    Join Date
    Jan 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Question Best CNC Cutter for 21mm pine

    Hi all,

    We've recently purchased a new CNC (our first) for our workshop. We cut almost exclusively pine boards in to various component to manufacturing wildlife habitats. The timber boards we use are 21mm thick, 245mm wide and 2000mm long.

    As this is our first dive in to the world of CNC machining, theres quite a bit to take in and get our heads around. We're looking for any advice that CNC veterans might have on tooling requirements and what we should purchase to start off with? Our focus is primarily on cutting those 21mm pine boards with reasonable speed and efficiency. Is there a CNC cutter that can do this is a single pass, or is multiple passes going to be the best option?

    The CNC we've just bought is a BCAM BCM2040C with a 2000mm*6000mm*200mm working area.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jan 2008
    Location
    Australia
    Posts
    967
    Downloads
    1
    Uploads
    0

    Default Re: Best CNC Cutter for 21mm pine

    For CNC, spiral carbide bits are generally what you want.

    Compression bits have an upcut tip and then most of the bit is downcut. This means if you are doing a full thickness cut, you get a clean cut on both sides. Upcut leaves a clean finish on the bottom and down cut on the top.

    7xCNC.com - CNC info for the minilathe (7x10, 7x12, 7x14, 7x16)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Best CNC Cutter for 21mm pine

Best CNC Cutter for 21mm pine