Australia Anyone in Brisbane, Australia looking for a cnc plasma project


Results 1 to 5 of 5

Thread: Anyone in Brisbane, Australia looking for a cnc plasma project

  1. #1
    Registered
    Join Date
    Jun 2011
    Location
    Australia
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Anyone in Brisbane, Australia looking for a cnc plasma project

    Hi,

    Not an advert as such but seeing if somene out there has a hankering to own and re-build a cnc plasma table. A bit of history: I got given an old magic eye oxy/acet profile cutter. Well some of of it. I got the gantry, rails and a lot of of electrnics that I could not use. Anyway long story short I made a roughly 1200mm x 2400mm (closer to 2305) table and mounted the rails on top. For the past 7 years it has been working perfectly for larger stuff. However, now that I have retired I want to do smaller type garden ornaments and the gantry is a tad heavy for the quick movements needed for small lettering. Only so many people like slightly wobbly rustic lettering. I also cut out bbq smoker parts with it and those come out great.
    So as part of my retirement present to myself I have purchased a cncrouterparts plasma table. Hence the need to move this on.
    As I will still need my hypertherm 45XP for the new table the old one comes without a plasma cutter. But has all the electronics and connections for a Hypertherm 45 or 45XP. or in fact any hypertherm with a cpc. It also has a breakaway torcholder etc. The electronics are CandCNC Bladerunner EtherCut with DTHC IV. Ohmic sensor etc etc. I have not included any pics as I was not sure if there would be any interest in the unit. It looks like a dogs brekkie at the moment because I've been cutting parts out with it and I'm a lazy old bugger.
    My feeling is that if someone were to take it on, they would be well advised to rebuild it with a lighter gantry etc. And some of the wiring needs to be re-routed as over the years as i added something I just hung the wire under the table.
    If you or someone you know might be interested give me a pm or reply with an address and we can chat. The unit is in Bethania 4205, Queensland.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2016
    Location
    Australia
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: Anyone in Brisbane, Australia looking for a cnc plasma project

    I may be interested. What sort of money are you looking for?



  3. #3
    Registered
    Join Date
    Jun 2011
    Location
    Australia
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Anyone in Brisbane, Australia looking for a cnc plasma project

    Quote Originally Posted by Pearo View Post
    I may be interested. What sort of money are you looking for?
    Sorry mate, it went last weekend.



  4. #4
    Registered
    Join Date
    May 2015
    Location
    Australia
    Posts
    280
    Downloads
    0
    Uploads
    0

    Default Re: Anyone in Brisbane, Australia looking for a cnc plasma project

    Quote Originally Posted by Pearo View Post
    I may be interested. What sort of money are you looking for?
    I might be able to help you out. Situated in Brisbane. PM me if interested.

    Rod Webster
    www.vehiclemods.net.au


  5. #5
    Registered
    Join Date
    Mar 2016
    Location
    Australia
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: Anyone in Brisbane, Australia looking for a cnc plasma project

    Quote Originally Posted by ajfoxy View Post
    Sorry mate, it went last weekend.
    All good, I can do wihtout another project at the moment anyway!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Anyone in Brisbane, Australia looking for a cnc plasma project

Anyone in Brisbane, Australia looking for a cnc plasma project