I may be interested. What sort of money are you looking for?
Hi,
Not an advert as such but seeing if somene out there has a hankering to own and re-build a cnc plasma table. A bit of history: I got given an old magic eye oxy/acet profile cutter. Well some of of it. I got the gantry, rails and a lot of of electrnics that I could not use. Anyway long story short I made a roughly 1200mm x 2400mm (closer to 2305) table and mounted the rails on top. For the past 7 years it has been working perfectly for larger stuff. However, now that I have retired I want to do smaller type garden ornaments and the gantry is a tad heavy for the quick movements needed for small lettering. Only so many people like slightly wobbly rustic lettering. I also cut out bbq smoker parts with it and those come out great.
So as part of my retirement present to myself I have purchased a cncrouterparts plasma table. Hence the need to move this on.
As I will still need my hypertherm 45XP for the new table the old one comes without a plasma cutter. But has all the electronics and connections for a Hypertherm 45 or 45XP. or in fact any hypertherm with a cpc. It also has a breakaway torcholder etc. The electronics are CandCNC Bladerunner EtherCut with DTHC IV. Ohmic sensor etc etc. I have not included any pics as I was not sure if there would be any interest in the unit. It looks like a dogs brekkie at the moment because I've been cutting parts out with it and I'm a lazy old bugger.
My feeling is that if someone were to take it on, they would be well advised to rebuild it with a lighter gantry etc. And some of the wiring needs to be re-routed as over the years as i added something I just hung the wire under the table.
If you or someone you know might be interested give me a pm or reply with an address and we can chat. The unit is in Bethania 4205, Queensland.
Similar Threads:
I may be interested. What sort of money are you looking for?