Connecting HY-JKM5 BREAK OUT BOARD and TB6600

[benaust]

Hi Guys

Very new to this, I am hesitating to connect the Motion controller card "HY-JKM5" to "TB6600" Stepper Driver. Has anyone worked with htese two who can help please.

HY-JKM5 http://www.datasheetq.com/datasheet-download/880623/0/ETC1/HY-JKM5

TB6600 TB6600 1 axis Stepper Motor 2-phase Driver Board for CNC Router [HY-TB6600-Module] - US $16.00 : HAOYU Electronics : Make Engineers Job Easier

Thanks

Ben

Similar Threads:

• newcomer needs help with wiring digram from M542T TO HY-JKM5 BREAK OUT BOARD
• plz help wiring limit&Home switches to TB6600 board
• Newbie- Ebay tb6600 driver board wiring help
• When do you add a break-out-board
• Got a ? on a break out board

[john-100]

does this help ????

[benaust]

Absolutely, Thanks John-100, It is exactly what I wanted, Big help, Many thanks mate.

[pimpbike]

Did you end up figuring out how to wire it?
I'm having the same difficulty.

Hi Guys

Very new to this, I am hesitating to connect the Motion controller card "HY-JKM5" to "TB6600" Stepper Driver. Has anyone worked with htese two who can help please.

HY-JKM5 http://www.datasheetq.com/datasheet-download/880623/0/ETC1/HY-JKM5

TB6600 TB6600 1 axis Stepper Motor 2-phase Driver Board for CNC Router [HY-TB6600-Module] - US $16.00 : HAOYU Electronics : Make Engineers Job Easier

Thanks

Ben

[benaust]

Hi PimpBike

I did exactly as "john-100" stated above or below. It worked for me. It is just matter of earthing the DIR(-ve) and CLK(-ve), well atleast thas what worked for me.





Re: Connecting HY-JKM5 BREAK OUT BOARD and TB6600

does this help ????

[hagonta]

the engine does not turn shaky, What is the reason ?