Reply with QuoteIf you are 100% positive that the models are in the same place, then it should work fine. Not sure how you'd know for certain that they were, though.
Using Aspire and Cut 3d on the same project
Ir I were to rough path and finish in different steps, alternating betweeen Cut3D and Aspire, would it explain why my projects had a displacement? considering both would have the same origin and dimensions marked.
Re: Using Aspire and Cut 3d on the same project
If you are 100% positive that the models are in the same place, then it should work fine. Not sure how you'd know for certain that they were, though.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
