I currently have both, but haven't used photo carve yet.
I came across this for you though: Vectric Forum • View topic - Aspire approach to PhotoVcarve
HTH,
Chris
I currently have V-Carve Pro and I am ready to upgrade to Aspire but being I've never used Aspire I'm wondering if I would be better off getting a combo of Photo V-Carve and Aspire so I can use customer photographs to create Photo V-Carves to place on planks or plaques or does Aspire have a photo v-Carve feature built into it?
Thank You
Gary
Similar Threads:
I currently have both, but haven't used photo carve yet.
I came across this for you though: Vectric Forum • View topic - Aspire approach to PhotoVcarve
HTH,
Chris
My Build: http://www.cnczone.com/forums/diy-cnc_router_table_machines/113711-my_build_-_many_thanks.html
Chris thank you, that will work great.
Download and install the Aspire demo, and play with it, and see if you even need it?
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
You can Bitmap Trace with Aspire. Haven't used Photo V-Carve. I would Upgrade to Apsire, you won't regret it. I'd wait to upgrade to Photo V-carve. Aspire may do those things as well.