NEED HELP FOR VMC FANUC OI MC CONTROLLED

Results 1 to 2 of 2

Article: NEED HELP FOR VMC FANUC OI MC CONTROLLED

  1. NEED HELP FOR VMC FANUC OI MC CONTROLLED

    1 Comments by kimu Published on 01-26-2019 02:45 AM
    I HAVE A VMC FANUC OI MC CONTROLLED, FROM FEW DAYS X & Y AXIS MACHINE VALUES ARE CHANGING (IN TERMS OF 0.2 TO 0.5 MM THAT TO IN "MINUS" SIDE), I CHECKED BOTH HOME AND TOLL CHANGE POSITIONS ARE NOT CHANGING, I ABLE TO FOUND THIS DIFFERENCE ONLY AFTER CHECKING ON THE FINAL PRODUCT WITH VERNIER CALIPER.I CHANGING THIS DIFFERENCE IN THE PROGRAM AGAIN RUUNING(THIS OCCURRING ON BOTH THE SIDES OF PALLETS AFTER 10- 12 CYCLES OF CONTINUOUS RUNNING)
    FOLLOWING ARE THE THINGS I CHANGED
    1. CHANGED X & Y AMPLIFIER BOARD (REMOVED FROM ANOTHER RUNNING MACHINE)
    2. CHECKED THE HYDRAULIC PRESSURE FOR PALLET BREAKS
    3. AND X AXIS MOTOR WITH ENCODER ARE NEW (THIS I WAS CHANGED 2 MONTHS BEFORE BECAUSE MOTOR WINDING DAMAGED)

    EVEN THE PROBLEM IS SAME

    Similar Articles:

  2. Total Comments 1

    Comments

  3. #2
    *Registered User* kimu's Avatar
    Join Date
    Jan 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: NEED HELP FOR VMC FANUC OI MC CONTROLLED

    i think the grid is shifting irrelevantly, can any one help me to get out of this how to resolve this



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

NEED HELP FOR VMC FANUC OI MC CONTROLLED

NEED HELP FOR VMC FANUC OI MC CONTROLLED