New to CNC programming

Results 1 to 2 of 2

Article: New to CNC programming

  1. New to CNC programming

    1 Comments by tonytorque Published on 09-05-2016 12:19 PM
    Hi all!
    I'm very new to CNC programming, and I'm running an old CL-707 Cincinnati Laser Machine. What I want to know is where I would enter the following lines into my cutting program. The machine we have was used when bought, and the previous operators left some command lines to over-ride the default ones as follows:
    See also attached File

    #116=100
    #148=32
    #126=10
    #127=10
    #128=7

    Similar Articles:
    New to CNC programming Attached Thumbnails New to CNC programming-cnc-lines-jpg  

  2. Total Comments 1

    Comments

  3. #2
    Registered
    Join Date
    Mar 2009
    Location
    CANADA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: New to CNC programming

    Quote Originally Posted by tonytorque View Post
    Hi all!
    I'm very new to CNC programming, and I'm running an old CL-707 Cincinnati Laser Machine. What I want to know is where I would enter the following lines into my cutting program. The machine we have was used when bought, and the previous operators left some command lines to over-ride the default ones as follows:
    See also attached File

    #116=100
    #148=32
    #126=10
    #127=10
    #128=7
    Are you using the cincinnati software? I programmed cl-707 for ten years, currently running/programming a cl-6.

    It should look a lot like this;

    ( NEST041618_141048 )
    ( CONFIGURATION - CL707-2000W )
    ( April 16, 2018 02:11 PM )
    ( Material = Mild Steel .075 )
    G20
    M42
    G89 P MS075.LIB
    #148=200 (FEEDRATE)
    GOTO1( Goto Sheet )
    N1M98 P100( Sheet 1 )
    M42
    M30
    :100
    ( Sheet 1 )
    ( Layout 1 )
    ( Sheet name = 16.000 in. x 16.000 in. )
    ( Total parts on sheet = 1 )
    ( Part - Rectangle041618_141039.prt = 1 )
    M42
    G90
    GOTO1( Goto Part )
    N1G53X3.132Y8.185
    G92X0Y0
    G68X0Y0R-90
    M98 P1000( Rectangle041618_141039.prt )
    G69
    M42
    M50
    M99
    :1000( PART:C:\_001_CNC_Files\Rectangle041618_141039.prt )
    ( ID:1 )
    G89 P MS075.LIB
    #148=200 (FEEDRATE)
    ( Part Outline )
    GOTO1( Goto Feature )
    N1
    G84
    G42G1X0.05F[#148*0.30]
    G1Y-2.75F#148
    G3X0.3Y-3I0.25
    G1X7.8
    G3X8.05Y-2.75J0.25
    G1Y2.75
    G3X7.8Y3I-0.25
    G1X0.3
    G3X0.05Y2.75J-0.25
    G1Y0
    G40
    M35
    M99( PART END )

    Hopefully this helps.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

New to CNC programming

New to CNC programming