Need Help. Z axis getting Deeper

[abdulwaheed]

Hi..!
i have a problem in making a v carve tool path it start perfectly but suddenly my z axis getting deeper through the material.
operating software: Mach3
Designing software : Aspire V10.5 And ArtCAM 2018

Similar Threads:

• Need Help!- Z axis suddenly goes deeper while machining
• Need Help!- Z axis suddenly goes deeper while machining
• Z Axis slipping deeper
• Z axis cutting deeper than expected

[joeavaerage]

Hi,
the two most likely problems are:
1) The tool is pulling out of its collet and therefore protruding more as time progresses
2) The Z axis is losing or gaining steps. Electrical noise interference is a possibility as is the stepper being marginally overloaded at the speed of operation.

Craig