Need Help! Trouble with downloading a stl file


Results 1 to 3 of 3

Thread: Trouble with downloading a stl file

  1. #1
    Registered obiwanthegobi's Avatar
    Join Date
    Oct 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Trouble with downloading a stl file

    I was sent a stl file of a design to open on my artcam 2012 jewelsmith, when I download the file which is about 25 mb it shows up on my desk top as a Microsoft edge file as 50kb, this is not recognized by the artcam program, I need to convert this to a readable file for artcam, can anyone help?

    Similar Threads:


  2. #2
    Member he1957's Avatar
    Join Date
    Jun 2018
    Location
    Tasmania
    Posts
    362
    Downloads
    0
    Uploads
    0

    Default Re: Trouble with downloading a stl file

    Sounds like the file may be corrupted. This could be from the sender or from you as the receiver. Verify whether the file should be copied as a binary or ASCII file and copy it accordingly from both ends (sender/receiver).

    Cheers,



  3. #3
    *Registered User* Ozikam's Avatar
    Join Date
    Aug 2018
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Trouble with downloading a stl file

    Hi, Maybe the file is broken. Please show the link then we can check a little more.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Trouble with downloading a stl file

Trouble with downloading a stl file