C=1 or C=2 is right or left, not inside and outside.
You need to edit your post processor to add the C, but I don't know if ArtCAM supports G41/G42 (Which is what the C= is).
The help file is the only reference I've seen for Xilog.
Dear Friends
i work now with Artcam and i can get the g code from this program for the xilog plus (xxl ) , i don't have any problem for this steps.
Q: When i read the g code for toolpaths profiling ( Along - Outside - Inside )
i don't find the c=0 or c=1 or c=2 .
how can i add this command (c=0, c=1 , c=2 for example ) without any problem.
also i need reference command book for xilog plus.
please could you help me
C=1 or C=2 is right or left, not inside and outside.
You need to edit your post processor to add the C, but I don't know if ArtCAM supports G41/G42 (Which is what the C= is).
The help file is the only reference I've seen for Xilog.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
thank you at first .
but i think i read in xilog plus help that c=0 center c=1 left c=2 right but in artcam program i can do that
normally.
the worker in CNC machine has problem for do this job. he can not understand where is the naif exactly.
because i need to add code to the post process for help the worker.
i hope you are understand me.
thank you again