Interface MPL3115A2 with an Arduino micro-controller

[olaf123]

Hello, I want to hook up a MPL3115A2 pressure transducer sensor and interface it with an Arduino micro-controller. But I have a question. I could set up the display and I can see it is working. The problem is that I get some random numbers, regardless of connecting the sensor or disconnecting the Arduino analog input from it. What might be the problem? Even when nothing is connected to the A0 or any other analog pin, I see the same behaviour.
I appreciate any reply and help.

Similar Threads:

• Could I use an Arduino Pro Micro with the ADS1115 to build a joystick?
• Interface MPL3115A2 with an Arduino micro-controller
• Need Help!- Mach3 ---> Brushless ESC interface with arduino?
• 109JB's User interface for the Arduino GRBL controller
• New Machine Build- Arduino 2560 + Mach3 Controller + TB6560 4 Axis 3.5A Stepper Driver Board Controller

[hfjbuis]

The MPL3115A2 has an I2C output, not analog.

If you follow the directions on this video, you should get it running