- One problem about building an electronic level with Arduino
-
Member
One problem about building an electronic level with Arduino
I want to build an electronic level with MPU-6050 and Arduino. I have one of my MPU-6050's mounted on a breadboard and started the example in the library but the numbers are drifting quiet a lot with the non-moving module? Today i maybe try it with an other MPU-6050.
Similar Threads:
-
-
Member
Re: One problem about building an electronic level with Arduino
I have no experience in using this sensor. Drifting should not be a problem if the drift is relatively small compared to the values you see when moving the sensor.
I found this example on the internet. His values also drift somewhat. Check if yours are comparable.
https://www.kynix.com/components/MPU...no-Pinout.html
- One problem about building an electronic level with Arduino
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules