Setting Micro Stepping in UGS

Results 1 to 2 of 2

Thread: Setting Micro Stepping in UGS

  1. #1
    Member
    Join Date
    Mar 2017
    Location
    United States
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Setting Micro Stepping in UGS

    Not sure if I'm in the right place , if wrong place moderator please move it to the proper place , thanks . I finally have my small machine running some . Old MAX NC 10 , powermax 11 steppers , currently a Arduino Uno & a CNC shield . I have my cnc shield set for half stepping , I can not find anywhere how to set half/step's in UGS . Can someone point me in the direction of where I can find instructions for setting
    1/2 stepping in UGS ?
    thanks
    animal

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2015
    Location
    Netherlands
    Posts
    281
    Downloads
    0
    Uploads
    0

    Default Re: Setting Micro Stepping in UGS

    UGS doesn't need to know this information because it gets the actual positions in mm from the grbl controller.
    All configuration is done in the grbl controller. Set the "X-axis travel resolution in steps per millimeter": parameter $100 to set the actual value.

    there is a grb WiKi where you can find information on how to use it and more.
    https://github.com/gnea/grbl/wiki



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Setting Micro Stepping in UGS

Setting Micro Stepping in UGS

Setting Micro Stepping in UGS