- Setting Micro Stepping in UGS
-
Member
Setting Micro Stepping in UGS
Not sure if I'm in the right place , if wrong place moderator please move it to the proper place , thanks . I finally have my small machine running some . Old MAX NC 10 , powermax 11 steppers , currently a Arduino Uno & a CNC shield . I have my cnc shield set for half stepping , I can not find anywhere how to set half/step's in UGS . Can someone point me in the direction of where I can find instructions for setting
1/2 stepping in UGS ?
thanks
animal
Similar Threads:
-
-
Member
Re: Setting Micro Stepping in UGS
UGS doesn't need to know this information because it gets the actual positions in mm from the grbl controller.
All configuration is done in the grbl controller. Set the "X-axis travel resolution in steps per millimeter": parameter $100 to set the actual value.
there is a grb WiKi where you can find information on how to use it and more.
https://github.com/gnea/grbl/wiki
- Setting Micro Stepping in UGS
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules