- UGS issue
-
Member
UGS issue
I am a new user of CNC any thing and I have a CNC router running Arduino/GRBL. I am using UGS to send the code.
When I load a tool path I see this in the Z+ view
ugsz+.jpg
and this in the Z- view
ugsz-.jpg
Why is this?
Similar Threads:
-
-
Member
Re: UGS issue
Z+ means the Z+ direction is coming out of the screen This is normal and shows the XY plane which is where the majority of moves are made. It is like you are looking down at the top of your part on the work table.
-
Member
Re: UGS issue
I may not have worded that well. Both these images are from the same g-code. Why do I only see the ramp in and the rapid movements on the
Z+ side and an image of what I am going to carve on the Z- side? Shouldn't I see both on the Z+ side?
Should it also show the tool position or at least the origin on the Z+ side as well?
The Z- is showing a negative of what I am carving.
Thanks
-
Member
Re: UGS issue
-
Member
Re: UGS issue
You may want to pose this question on the UGS github issues page.
https://github.com/winder/Universal-...-Sender/issues
-
Member
Re: UGS issue
resolved
for some reason the transparency of the Z color was at 0 pct. I increased it to 50% and all is well.
- UGS issue
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules