Need Programming help - Page 2

Page 2 of 2 FirstFirst 12
Results 21 to 25 of 25

Thread: Need Programming help

  1. #21
    Member KH0UJ's Avatar
    Join Date
    Jul 2016
    Location
    Philippines
    Posts
    660
    Downloads
    0
    Uploads
    0

    Default Re: Need Programming help

    Shoot you back an email

    Choose which one you like to drive a stepper driver + stepper motor

    Need Programming help-img_20180618_063717-jpg

    Attached Images Attached Images


  2. #22
    Member
    Join Date
    Sep 2006
    Location
    usa
    Posts
    37
    Downloads
    0
    Uploads
    0

    Default Re: Need Programming help

    [QUOTE=KH0UJ;2190850]Shoot you back an email

    Choose which one you like to drive a stepper driver + stepper motor


    I have an Arduino UNO, Leadshine AM882 Digital Stepper driver, and here is a picture of my two motors. Thanks

    Attached Images Attached Images


  3. #23
    Member KH0UJ's Avatar
    Join Date
    Jul 2016
    Location
    Philippines
    Posts
    660
    Downloads
    0
    Uploads
    0

    Default Re: Need Programming help

    Ok sir that will do so let me summarize what you want basing on your video and your control box with switches, you want the steppers to have an RPM counter, a forward reverse switch on the steppers in conjunction with the counter (+/-) you want to control the speed of the rotation from 0-1000 RPM thru a potentiometer, the counter must be subtracting the RPM counter display output if you set the machine in reverse mode. is this correct? anything else you wanna add sir?

    I will start coding this after work today

    on my opinion your RPM counter must be an independent module, your arduino will just be a plain stepper driver.



  4. #24
    Member
    Join Date
    Sep 2006
    Location
    usa
    Posts
    37
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by KH0UJ View Post
    Ok sir that will do so let me summarize what you want basing on your video and your control box with switches, you want the steppers to have an RPM counter, a forward reverse switch on the steppers in conjunction with the counter (+/-) you want to control the speed of the rotation from 0-1000 RPM thru a potentiometer, the counter must be subtracting the RPM counter display output if you set the machine in reverse mode. is this correct? anything else you wanna add sir?

    I will start coding this after work today

    on my opinion your RPM counter must be an independent module, your arduino will just be a plain stepper driver.

    I want the display to count revolutions. For example if I have 500 on the display. I want to turn the switch on, (the switch on the top left side of the box). then the motors will turn 500 turns and then shut off.



  5. #25
    Member
    Join Date
    Sep 2006
    Location
    usa
    Posts
    37
    Downloads
    0
    Uploads
    0

    Default Re: Need Programming help

    Well thanks to hfjbuis, my Arduino programming is complete. Many emails back and forth with little test programs.
    here is a little video explaining how it works





Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need Programming help

Need Programming help