[QUOTE=KH0UJ;2190850]Shoot you back an email
Choose which one you like to drive a stepper driver + stepper motor
I have an Arduino UNO, Leadshine AM882 Digital Stepper driver, and here is a picture of my two motors. Thanks
Shoot you back an email
Choose which one you like to drive a stepper driver + stepper motor
[QUOTE=KH0UJ;2190850]Shoot you back an email
Choose which one you like to drive a stepper driver + stepper motor
I have an Arduino UNO, Leadshine AM882 Digital Stepper driver, and here is a picture of my two motors. Thanks
Ok sir that will do so let me summarize what you want basing on your video and your control box with switches, you want the steppers to have an RPM counter, a forward reverse switch on the steppers in conjunction with the counter (+/-) you want to control the speed of the rotation from 0-1000 RPM thru a potentiometer, the counter must be subtracting the RPM counter display output if you set the machine in reverse mode. is this correct? anything else you wanna add sir?
I will start coding this after work today
on my opinion your RPM counter must be an independent module, your arduino will just be a plain stepper driver.
Well thanks to hfjbuis, my Arduino programming is complete. Many emails back and forth with little test programs.
here is a little video explaining how it works