PDA

View Full Version : Need Help! Lining pick off collet up with part



Q Special
02-12-2010, 07:49 PM
I am making a pin on the front side and a pin on the back side with a box in the middle.
The pins are .150 center line to cl.

Citizen M32

I have offset in the program the pickoff collet .300 on the X.
I am not sure how to synch the collet to the part or s1.
I cant use G899 R1 because of the X shift .

Anyone have any ideas?
This job was 4 years ago, so there must be a way.