View Full Version : What do you make with your wire foam cutters?

01-16-2010, 06:48 PM
I see that there are many people out there building there own DIY wire foam cutters, from 2 axis to 5 and everything in between. I would like to know what you make with your foam cutter, and what are they used for? I feel like a moron for asking this question, but I have no clue and have always been curious.


01-25-2010, 11:33 PM
I think there is a really broad range of uses from making model airplane wings to huge foam signs and sculptures. I am making one to cut architectual mouldings for decorating stucco and brick. I think universities use them for models and such. There is a bunch of other things I am sure.

Scott Lister
10-18-2010, 12:58 PM
I cut wing cores for remote control gliders and turbine blades for wind power generators.


06-22-2011, 01:50 AM
I am new also and am getting ready to build a cnc as well. I plan on using mine to make molds for fiberglassing. I am still researching what I need though and am lost...lol.