PDA

View Full Version : Problem Heidenhain TNC355 postprocessor



vasyl markiv
12-29-2009, 03:31 PM
Hello !
I need SolidCam postprocessor for Heidenhain TNC355 .
Help me !

jake_tb
01-13-2010, 07:18 PM
I have attached a copy of my mac and GPP file for you. This post is for a 3 axis TNC 355 so should work for you.

If you cant recive it, let me know your email and ill send them to you!

Cheers

Jake

vasyl markiv
01-18-2010, 09:18 AM
Hello !
My email vmarkiv@ukr.net
Thank you !!!

mhm33
01-27-2010, 05:27 AM
HELLO jake_tb please SEND TO ME
MY MAIL mhm33@yandex.ru
Thank you !!!

mhm33
01-27-2010, 05:28 AM
HELLO jake_tb please SEND TO ME
MY MAIL mhm33@yandex.ru
Thank you !!!

pinguS
01-27-2010, 07:42 AM
Do you have any posts that uses @tmatrix in the gpp, or anything that uses 5 axes, even 5 axis with 4 simultaniuosly, that you have used physically on a machine??

moovi
01-29-2010, 10:46 AM
Hi everyone !
I need Pro/engineer (for 2001 verison or later, if it has some meaning :) ) postprocessor for Heidenhain TNC355(and/or tnc155) (machine : Mikron WF 6C).

moovi.work@gmail.com

THX! :)

Flame
02-08-2010, 04:24 PM
I need SolidCam postprocessor for Heidenhain TNC430 - TNC530
pvekov@unitednet.bg

Help me !
Thank you!

dotn
04-20-2010, 02:40 PM
I need SolidCam postprocessor for Heidenhain TNC430 - TNC530 - TNC426
Please help
thanks

dotn
04-22-2010, 10:15 AM
I need SolidCam postprocessor for Heidenhain TNC430 - TNC530 - TNC426
Please help
thanks
my e-mail is :

gdotn30@gmail.com

yemoro
05-19-2010, 04:17 PM
Hi for evey oneĀ”

I need SolidCam postprocessor for Heidenhain TNC530.

Thanks for your help

Matth3w
06-12-2010, 01:06 AM
Hi,

Im looking for a Heidenhain TNC530 post for solidcam 2008.

My email is hattermd@gmail.com

Thanks,

stefan007
06-12-2010, 02:27 AM
please help n need some help mastercam x lathe sample videos on 2 axis machine

stefan007
06-12-2010, 02:38 AM
Hello
n need mastercam x postprocessor for KC6A LATHE machine pleace help
my e mail stefanvonstade2@gmail.com

ccosma
06-12-2010, 10:47 AM
Can someone help me with a post processor for TNC 355 to EdgeCam or Visual Mill? Thanks
ccosma2004@yahoo.com

ccosma
06-15-2010, 02:02 PM
Can someone help me with a post processor for TNC 355 to EdgeCam or Visual Mill? Thanks
ccosma2004@yahoo.com

axis
06-15-2010, 04:42 PM
if you are looking for a post for visual mill go to the mecsoft home page or make one yourself in the post creator in the software and this post is getting a little crazy if you need a post call the company you purcased the software from and they will help you out most of the time for free aslong as the post isnt somthing crazy. if people would stop ripping off the software getting a post is no problem.

rogi_008
07-27-2010, 06:07 AM
Hay, every one

I use ProE an I need postprocesor for Heidenhain TNC 530 3-axis machine help please.

My email -pavec.kristijan@gmail.com

desmo special
01-13-2012, 03:18 PM
I need postprocessor for Heidenhain TNC 155, and for Maho Philips 432.
Desmo special

desmo special
01-16-2012, 07:10 AM
Hello every one I need a solidcam post processor for Maho Philips 432, and Heidenhain TNC 155.
Thanks in advance!

Kindregards, Desmo special.

carlo255
03-22-2012, 07:10 AM
Hi everyone

I need al Solidcam 2010 postprocessor for Heidenhaihn TNC 430 or 530

I hope somebody can sends it to mee

Thanks

solidcam2011ls
04-09-2012, 04:54 PM
I would love a copy of your Heidenhain post save me lots of work.
georgedima80@hotmail.com

abood
06-28-2012, 02:36 AM
bro i need a post for ( heidenhain 355 control) milling

thanks alot

wrshka
07-11-2012, 11:51 AM
hello,
i need post for maho 432 and heidenhain TNC 355 for SolidCAm 2010
thnx

barbelas
09-29-2012, 06:32 AM
Hola!!
I need SolidCam or Mastercam postprocessor for Heidenhain TNC355.
Thank you for help me
my email is martivi@gmail.com

solidcamx
03-29-2013, 07:51 AM
Answer the solidcamx@gmail.com

Can you do it fast postprocessor Heidenhain TNC.

I have a few final postprocessor for Heidenhain TNC.

greeting

TOM-CAT
12-06-2013, 06:34 PM
hello
I need Power mill 8 and 6 postprocessor for Heidenhain TNC355 for 3 and 4 axis.
machine is BRIDGEPORT INTERACT 412.
THANKS
EMAIL IS :TABRIZ.MACHINERY@GMAIL.COM

ivan_bijelic
06-08-2015, 08:24 AM
Hi every one,

I need post for Maho Phillips 432 and Heidenhain TNC 355 for SolidCAM 2013
my e-mail is ivan_bijelic@yahoo.com


Thank you

SuRvivoR
11-04-2016, 08:47 AM
Hello
I need SolidCam postprocessor for Heidenhain TNC355 .
please Help me !
my Email is:
wolf166@yahoo.com

bole432
11-18-2016, 07:59 AM
Hello
I need SolidCam postprocessor for Heidenhain TNC355 .
please Help me !
my Email is: bojan@staxtechnologies.com

aiwnios
01-09-2017, 08:20 AM
If anyone has a SolidCam 2016 post for the Heidenhain TNC426,
it would be greatly appreciated.... aiwnios@yahoo.com

juansapete
01-14-2017, 03:05 AM
Hello !
I need SolidCam postprocessor for Heidenhain TNC430 or TNC530 or TNC355 .
Help me !

bubblelamp
03-25-2018, 10:50 AM
Is there any chance i could have a copy of the files please. Thank you
my email is stuartallison_@msn.com