PDA

View Full Version : What linear trucks did DynaCNC use?



macona
11-27-2009, 03:38 PM
We are adding a second gantry to our DynaCNC table. Anyone know what truck model they used on the linear rails? All I can see is HG25 on the plastic wiper.

bogger44
11-30-2009, 02:39 AM
We are adding a second gantry to our DynaCNC table. Anyone know what truck model they used on the linear rails? All I can see is HG25 on the plastic wiper.

HIWIN linear rails HG will be the mod # and 25 the size goto HIWIN web site. You may be able to get this at your local bearing store.

Mojito500
07-02-2010, 01:39 PM
I had to replace one of ours, and I found an exact replacement at McMaster-Carr -> linear rails/blocks (http://www.mcmaster.com/#linear-guide-blocks-and-rails/=7sdhro).

Make sure you have a caliper and a bearing in hand to find the right one.