PDA

View Full Version : No Controller Power Techno Premium Class Router



ddk114
03-18-2005, 04:02 PM
Servos have power. But it won't move. Interface shows button activation, but nothing happens. Keep getting enable power dialog box. Manufacturer suggests broken communication link since it doesn't know that power is actually enable.
Could this be a problem with the servo board in pc or the controller? I can't see a problem anywhere.
Tried another computer (same sevo board), keyboard, scsi cable, serial cable, all with the same results--no go.
Suggestions would be helpful. I have to keep working with Techno as well to resolve this problem.