PDA

View Full Version : Need Help! Error in Solidcam



macrosat
10-04-2009, 09:32 PM
:banana:When I calculate the operation,I get IGES write excepion "IGES writer resulted in failure" error. Why?

Brakeman Bob
10-05-2009, 05:35 AM
Tell us more Macrosat. What sort of operation is it i.e. 2D, 3D, HSM, 5 Axis. What version of SolidCAM and what service pack. Are you using the new "STL" machining module in SolidCAM? I have never seen an IGES file in SolidCAM (the verify modules use STL) so is it a SolidWorks problem. Is the part an imported IGES file or SolidWorks native? Tell us more please.

macrosat
10-05-2009, 06:00 AM
Tell us more Macrosat. What sort of operation is it i.e. 2D, 3D, HSM, 5 Axis. What version of SolidCAM and what service pack. Are you using the new "STL" machining module in SolidCAM? I have never seen an IGES file in SolidCAM (the verify modules use STL) so is it a SolidWorks problem. Is the part an imported IGES file or SolidWorks native? Tell us more please.

HSM module and solidcam 2009.

Brakeman Bob
10-06-2009, 04:19 AM
Having checked the SolidCAM website, this bug was fixed in SP2.