PDA

View Full Version : partner4 milltronics crt rpl. help



ekap3537
09-08-2009, 10:27 PM
We have a partner4, the OEM crt is a MD2000-190 , Ten pin header. has vertical synch, horizontal synch ,12vdc, video, and pin1 & 10 = gnd input on the crt board. Can we use another 9" crt that has just a bnc video input? or do we need a crt with ver./hor. sync coming from the oem video board? We have a crt from a security cam-sys. that we could use if we can. Has anyone had simular problems. Its getting hard to find an oem replacement. OH and it has to run asap like yesterday. Could our loss of video also be video card related? any help ?
Gene K.