PDA

View Full Version : motor step counts



functionbikes
07-15-2009, 02:48 PM
Hey everyone, I have the 1200oz steppers- got them wired up and was wondering if they have 200 steps per revolution?I am using mach 3 for the controller- a little help here

automationtechinc
07-22-2009, 07:30 PM
Hey everyone, I have the 1200oz steppers- got them wired up and was wondering if they have 200 steps per revolution?I am using mach 3 for the controller- a little help here

It is 200 steps/Rev.
www.kelinginc.net

Larken
07-27-2009, 11:37 PM
It totally depends on the stepper drive you are using. Almost all Hybrid steppers have 200 full steps/rev, but a microstepping drive can divide that down up to 400, 800,....and some up to 64000 steps/turn.