PDA

View Full Version : Need Help! How to measure the tools DMU 50V/TNC 426



hiatec
07-02-2009, 03:22 PM
Hello Everbody,
We got a DMU 50V with a Heidenhain 426 Control. Unfortunately I don't have the manual for the machine and I am having problems measuring the tools.
Can you help me by describing a procedure to measure the tools? do you have a manual available?
I really appreciate your help.

Best regards,

Boracnc
07-10-2009, 04:43 PM
I think you have to measure your tools by hand.You can use a table comparator by touching from your toolholder to your tool edge.If you don't have a tool shadow measuring equipment of course.

Boracnc
07-11-2009, 06:07 AM
http://img3.imageshack.us/img3/5320/takma.jpg

How to measure tools by hand.